NEWS & BLOG

Breaking news and resources from across the industry.

MBAKS Blogs:
Homeowners
  • Annual Performance Report Marks Key Milestone for Permit Reform Law

    by User Not Found | Jul 21, 2025

    Annual Performance Report Marks Key Milestone for Permit Reform Law

    by MBAKS Government Affairs

    Report reaffirms the need to improve housing permit timelines so housing can be available more quickly.

    The Washington State Department of Commerce has published the first draft Annual Performance Report required by Senate Bill 5290.  The data reflects permits for which a decision was issued in 2024, before the current SB 5290 timelines went into effect. Performance is measured on the average duration it takes to process certain permits by category using calendar days.

    The draft report shows where jurisdictions are falling short and reaffirms there is a long way to go to shorten review timelines, enabling housing to proceed more quickly.

    Among the initial findings from the report are:

    • Construction Permits on average took 81% longer to process than the statute.
    • Preliminary Subdivision on average took 199% longer to process than the statute.
    • Final Subdivision on average took 184% longer to process than the statute.

    The report reinforces the need to reform and streamline the state’s outdated subdivision laws, a top legislative priority for MBAKS. This information is also important for our ongoing work with cities and counties to improve permit timelines. Having transparency in the permit processing data will help us to better identify roadblocks and work with jurisdictions to lower barriers to adding much needed housing.

    Seven counties are subject to SB 5290’s annual reporting requirements, including Clark, King, Kitsap, Pierce, Snohomish, Thurston, and Whatcom.  

    For more information on SB 5290 requirements, visit Commerce’s Local Project Review page

  • June Builders Bulletin

    by User Not Found | Jun 26, 2025

    Contact: data@mbaks.com

    Builder Confidence Dips as Industry Gauges Market Conditions

    Builder confidence continues to falter, with the national Housing Market Index (HMI) falling to 32, a 29% drop year over year. Confidence in the Western U.S. remains especially low, with an HMI of just 22. The HMI, based on a monthly NAHB survey, reflects how builders view current and future conditions in the single-family housing market.

    DOWNLOAD THE REPORT

  • May Builders Bulletin

    by User Not Found | May 23, 2025

    Contact: data@mbaks.com

    Seattle Metro Permit Volume Drops in Q1 2025

    New permit data show a 33% decline in permits in the Seattle metro area in the first quarter of 2025 compared to the same period last year. While single family permits saw a modest increase in King and Pierce counties through March of this year, they fell 43% in Snohomish County. Multifamily permits were down 46% across our metro area during Q1 2025 compared to last year, with the biggest decline in King County. Pierce County was the only county to see an increase in multifamily permits during the first quarter.

    DOWNLOAD THE REPORT

  • Lot Splitting is Now Law in Washington—A Win for Housing, Homeowners, and Affordability

    by User Not Found | May 21, 2025

    MBAKS joined Governor Ferguson as he signed HB 1096 into law.

     

    Big news for housing in Washington: Governor Bob Ferguson has signed HB 1096 into law, legalizing residential lot splitting across the state. After three years of advocacy, this landmark reform creates a straightforward, administrative process for homeowners and homebuilders to divide a single lot into two—unlocking small-scale infill, expanding homeownership, and creating new paths to affordability.

    For decades, Washington law required homeowners and builders to navigate complex, costly subdivision processes that could take years—even when the existing lot already met zoning and infrastructure standards. HB 1096 finally fixes that, allowing qualifying lots to be split without major red tape, and enabling cities to review building permits alongside lot split applications.

    Lot splitting won’t just create more homes—it will also allow aging homeowners to age in place, help families build wealth through multigenerational housing, increase opportunities for supplemental income, and offer first-time buyers access to starter homes in high-opportunity neighborhoods. It complements recent reforms like HB 1110 (middle housing) and supports the Growth Management Act’s goals by enabling gentle infill where it’s needed most.

    HB 1096 ensures accountability by requiring clear, objective standards, displacement mitigation, and infrastructure availability before approval. Cities must implement the new policy by 2027 (or within two years for non-GMA jurisdictions), and guidance is expected from the state Department of Commerce later this year.

    This is a major step toward restoring affordability and giving everyday Washingtonians more options to stay, build, and invest in their communities—one lot at a time.

    View MBAKS Lot Splitting Brief for more information: Creating More Housing Through Lot Splitting.

     

  • April Builders Bulletin

    by Katie Bauer | Apr 29, 2025

    Contact: data@mbaks.com

    Housing Market Shows Modest Inventory Gains Amid Rising Prices and Slowing Construction

    Housing inventory in King and Snohomish counties improved slightly in March 2025 but remains below healthy market levels, with King County at 1.9 months' supply and Snohomish County at 1.4. Median home prices continued to rise, reaching $977,500 in King County and $790,000 in Snohomish County for single-family homes. Builder confidence declined sharply, with the national Housing Market Index falling 22% year over year to 40 and the Western regional index at 35. Construction activity also slowed, as single-family and multifamily permits in the Seattle metro area fell 6% and 5% respectively compared to last year, and Washington’s construction employment dropped by over 12,000 jobs.

    READ THE FULL REPORT

  • Case Study: Forest Run

    by Katie Bauer | Apr 24, 2025

    Vital Stats

    Section

    Points

    Location: Bellingham
    Star Level: Built Green 5-Star
    Checklist: 2021 Single-Family New Construction 

    Builder: TC Legend Homes                                                                Verifier: Ecoe Company LLC

    Site and Water163
    Energy Efficiency152
    Health and Indoor Air Quality127
    Material Efficiency
    114
    Equity and Social Justice41
     Total Score597

    Photography Credit: John Trax with Zigzag Mountain Art

    Written by: Nicole Miller

    Project Overview 

    Out on a secluded lot in Whatcom County, Forest Run home is a peaceful retreat for retirement. This 2 bed, 1 bath, 1234sf single-family-residence plus 1152sf garage and shop was built on a lot that entices you to pull up a chair and listen to the birds, frogs, bugs and furry critters in the surrounding forest. Once inside, you feel a sense of coziness by the warm-toned finishes while still having a great connection to the idyllic nature surrounding the home through the large and strategically placed windows.

    With a HERS index score of 41 without and 10 with solar production respectively, Forest Run excels at energy efficiency. On top of being awarded Built Green 5-Star, the home has received Energy Star, EPA Indoor airPLUS, and Zero Energy Ready Home certifications.

    BUILT GREEN HIGHLIGHTS:

     

    Site and Water

    • Retained a tree grove on site
    • No turf grass installed
    • Landscaped with drought-tolerant plants
    • Landscaped with at least 50% native species
    • Achieved a 53% reduction in water usage
    • All WaterSense certified plumbing fixtures

    Energy Efficiency

    • ERI of 41 without solar production and 10 with solar production
    • Energy Star & DOE Zero Energy Ready Home certified
    • Passive solar design with advanced features such as triple-pane, Low E, argon-filled windows and extended eaves. Windows are sized and placed to achieve solar shading in the summer and solar heating during the winter.
    • Heated using a ductless mini-split heat pump
    • Continuously ventilated in every room by the Fantech Hero 250 HRV
    • 5.04kW rooftop solar array
    • Exceptionally air sealed to 0.46ACH
    • Highly insulated envelope with R-29 walls, R-59 ceiling, R-20 under-slab insulation and R-24 stem walls

    Health and Indoor Air Quality

    • EPA Indoor airPLUS certified
    • GREENGUARD Gold certified oak flooring
    • Only low-/no-VOC finishes used
    • Continuously ventilated by the Fantech Hero 250 HRV in a balanced system
    • Ventilation system has built in HEPA filtration to ensure clean indoor air
    • Built-in humidity, temperature, and CO2 monitors
    • All electric home

    Materials Efficiency:

    • Structural Insulated Panel (SIP) exterior walls and roof which reduces on-site waste and transportation time
    • Locally produced under-slab insulation, Hardie siding and SIPs
    • Insulated Concrete Form (ICF) stem walls which reduced concrete use
    • Solid, locally made, maple plywood cabinets
    • Embodied carbon calculated using BEAM to help inform future construction
    • Focused on using at least 10 products with EPDs to be able to more accurately calculate embodied carbon

    Equity & Social Justice:

    • Developed and implemented a project specific ESJ plan
    • Designed for aging-in-place with zero-threshold entry and shower, at least 2’10” doors, lever handles, and widened walkways

     

  • Grow Community—A Model of Sustainable, Connected Living on Bainbridge Island

    by Katie Bauer | Mar 28, 2025

    Location: Bainbridge Island
    Star Level: Built Green 5-Star
    Checklist: 2021 Single-Family Residential New Construction 
    Builder: Green Canopy NODE
    Verifier: BEE Engineers
    Exterior of Grow Community building at dusk

    Written by: Genevieve Hale-Case

    Overview 

    Grow Community on Bainbridge Island is a shining example of how thoughtful design and sustainable building practices can create vibrant, connected neighborhoods. Certified as a 5-Star Built Green development, the community seamlessly integrates eco-friendly principles with modern, convenient living. Over a decade in the making, Grow Community culminated in mid-2024 with the completion of The Trillium, its third and final phase. This final chapter reaffirms the project's dedication to environmental stewardship and innovative residential design.

    Grow Community home interior

    Project Background

    Since its inception in 2013, Grow Community has been driven by a vision of creating a sustainable neighborhood that prioritizes both people and the planet. Each phase built upon the successes of the previous, refining green building strategies while strengthening the sense of community. The final phase, The Trillium, was constructed by Green Canopy NODE, whose expertise in high-performance, sustainable building helped bring Grow Community’s long-term vision to completion.

    Location & Lifestyle

    Located in the heart of Bainbridge Island’s Winslow district, Grow Community offers residents a true “5-minute lifestyle.” With shops, cafes, restaurants, top-rated schools, parks, beaches, and the Seattle ferry terminal all within a half-mile radius, residents can comfortably live without reliance on cars. This prime location not only reduces transportation-related emissions but also enhances residents' quality of life through easy access to amenities and nature.

    Community-Centric Features

    At the center of Grow Community lies The Park, a generous green space intentionally designed to encourage interaction and foster neighborly connections. Seasonal events like summer concerts, community picnics, and informal gatherings bring life to this space throughout the year.

    Complementing The Park is the community center, a vibrant hub offering a variety of resident-driven activities. Whether it's Mahjong games, Tai Chi sessions, book clubs, or casual gatherings, the center strengthens social bonds and promotes a spirit of inclusion and engagement. These thoughtful design elements distinguish Grow Community from more isolated suburban developments, emphasizing connection over separation.

    Grow Community community gardens

    Sustainability Highlights

    Grow Community’s sustainability efforts extend well beyond certifications—they are embedded in every aspect of the development. The third and final phase, The Trillium, continues to reflect the community’s commitment to responsible land use, resource efficiency, and long-term environmental stewardship. From the start, careful attention was paid to the project’s location within Bainbridge Island’s Urban Growth Area (UGA). The site was previously developed, minimizing the impact on undeveloped natural areas, while promoting a denser, walkable neighborhood pattern. This conscious choice supports regional growth goals while preserving surrounding ecosystems. Landscape design and site improvements were integral to reducing long-term environmental impacts. Grow Community preserved and reused topsoil onsite and implemented compost-amended planting areas, providing residents with opportunities for food production. Strategically selected tree species were planted throughout the neighborhood to provide natural shading during summer months, mitigating heat gain around homes and parking areas. Planting beds were mulched with at least three inches of organic material to retain soil moisture and reduce the need for irrigation.

    Energy efficiency and indoor air quality were prioritized at every stage of construction. Third-party inspections conducted by BEE Engineers ensured that each home had a continuous air barrier, verified after the framing phase. Insulation was carefully inspected to confirm consistent, thorough application, maximizing thermal performance. To support healthy indoor environments, Grow Community specified only low- or non-VOC, non-toxic paints, sealers, adhesives, and finishes throughout all units. Flooring choices further reflected this emphasis on health, with over 85% of hard-surface flooring meeting strict emission standards, such as CDPH 01350, certified by GREENGUARD and other third-party programs. Carpet was intentionally omitted from all homes, reducing dust and allergens. Each home includes a designated shoe removal area, featuring a built-in natural fiber mat to limit pollutants entering the living space.

    Grow Community bathroom interior

    Recognizing the growing importance of renewable energy, the project integrated solar readiness throughout the development. Type 1 units are equipped with 8.40kW grid-tied solar electric systems, utilizing high-efficiency Silfab Solar modules paired with SMA inverters and rapid shutdown devices. Type 2 units are pre-wired for easy solar panel installation in the future, allowing residents to expand their renewable energy usage over time. Similarly, each home is wired with conduits for future electric vehicle charging, supporting the transition to cleaner transportation options.

    Material efficiency was another key focus. Working closely with Green Canopy NODE, the project incorporated prefabricated elements—such as panelized framing walls, I-joists, trusses, Glulams, and prefabricated mechanical/electrical/plumbing walls—to reduce construction waste and streamline building processes. All insulation materials contain a minimum of 40% recycled content, while environmentally friendly, formaldehyde-free, and CFC/HCFC-free foam products were used throughout. Composite wood windows contribute to durability and performance, complementing the project’s overall sustainable approach. Taken together, these strategies underscore Grow Community’s role as a model of sustainable development, blending thoughtful design with practical innovations that benefit residents, the broader community, and the planet.

    Resident Experience

    One resident captured the essence of life at Grow Community:

    "I was grateful to move into two new homes in the Grow Community knowing there was little off-gassing from the materials. Both homes were designed by Jonathan Davis with a lot of attention to light. This is very important to me living in the cloudy Northwest. Also, I feel more a part of the outside surroundings than I would in a condominium style. Both of my homes have circulating, cleansed air. This has been so great, especially the few times we had the smoke from the fires. The people in this community are diverse and in some cases quirky. I appreciate the different points of view and yet the willingness to help each other."

    Grow Community balcony with outdoor seating

    Conclusion

    Grow Community is much more than a residential development—it's a blueprint for how sustainability, livability, and community can coexist in harmony. Its third and final phase, The Trillium, constructed by Green Canopy NODE, stands as a testament to the power of intentional design and long-term environmental thinking. Through its exemplary commitment to Built Green principles, Grow Community offers residents a balanced, modern lifestyle rooted in environmental mindfulness and a strong sense of connection.

  • Middle Housing Forum Offers Key Insights on State Law Changes

    by User Not Found | Mar 27, 2025

    Event part of MBAKS’ ongoing engagement on HB 1110 & HB 1337 implementation

    MBAKS recently hosted a Middle Housing Forum focusing on state law changes now being implemented that could transform the housing landscape in our region and state.

    The March 25 learn-at-lunch style event drew nearly 100 attendees. It was designed to help MBAKS members navigate the coming changes related to middle housing and accessory dwelling units (ADUs) following the adoption of HB 1110 and HB 1337 in 2023.

    Panelists included Lilith Vespier, Infill Housing Manager with the Department of Commerce; Adam Weinstein, Director of Planning & Building for the City of Kirkland; and Ryan Gillis, Founder and CEO of Gillis Real Estate. 

    In case you missed it, members can find a copy of the presenters’ PowerPoint slides on our Middle Housing & ADU Resources page, which is part of the Resource Library on MBAKS Connect.

    Following panel presentations, attendees also heard brief updates from a handful of other city representatives in attendance from Bellevue, Bothell, Kent, and Lynnwood. Many cities in our two counties are in the process of updating local codes to comply with the new middle housing and ADU state laws. Local jurisdictions have until June 30, 2025 to update their codes.

    The forum ended with audience Q&A time. During this open discussion, some members reiterated a point Ryan Gillis made during his presentation--the importance of flexibility in local codes so that builders can better respond to market demand. Another member stressed the importance of ensuring floor area ratios and building heights are properly set so that more project types are feasible to build. 

     

    Members also expressed concerns about affordable housing fees that some jurisdictions are adopting alongside middle housing codes, as they will create unnecessary barriers to adding more housing choices.

    MBAKS Executive Director Jerry Hall closed by sharing MBAKS’ overarching suggestion for cities implementing middle housing and ADU changes – “keep it simple.” The easier and more cost-effective it is to build middle housing, the more likely it is to be built, and the more attainable it will be for those looking for a place to call home.

    Thanks to all who attended the Middle Housing Forum! To keep up with our advocacy work and changes related to middle housing and ADUs, MBAKS members are encouraged to engage with our Builders Councils.

     

  • Case Study: 4-Star Built Green Certified Floating Home on Lake Union

    by Katie Bauer | Feb 24, 2025

    Vital Stats

    Section

    Points

    Location: Seattle
    Star Level: Built Green 4-Star
    Checklist: 2021 Single-Family Residential New Construction                                                                    Builder:  Nice Building Corp

    Verifier: Balderston Associates

    Site and Water102
    Energy Efficiency112
    Health and Indoor Air Quality86
    Material Efficiency
    106
    Equity and Social Justice30
    Operation, Maintenance and Homeowner Education9
     Total Score445

     

    Photography Credit: Baylee Reiner

    Written by: Jenny Brent

    Project Overview 

    Situated on the picturesque Lake Union in Seattle, an innovative floating home has achieved Built Green 4-Star certification, a significant accomplishment by Nice Building Corp. The project, which blends eco-friendly design concepts with unique engineering solutions, demonstrates the incredible potential of environmentally conscious construction, even in one of the most challenging locations – on water!

    Constructed under the 2018 Washington State Energy Code, this floating home utilized a variety of specialized solutions to meet various energy efficiency, air quality, and site requirements set by the Built Green program. Key features on this project include:

    Durable, Non-Toxic Wood Siding and Decking: Nice Building Corp’s decision to use Accoya® Shou Sugi Ban for the project’s siding shows the home’s commitment to high environmental standards. The builder achieved points for utilizing wood siding that is third-party, FSC® COC certified, and for using thermally modified wood siding that does not require wood sealers. The project also achieved points for using Accoya® Decking with similar features. 

    Mineral Wool Insulation: Owens Corning Thermafiber® mineral wool insulation was utilized in the home. This project achieved points for using low-emitting materials and this product contains a minimum 70% Recycled Content.

    Low-Emitting Flooring: For the interior, the home features Preverco flooring, which is GREENGUARD Gold Certified, ensuring the materials used contribute to healthier indoor air quality and meet high environmental standards. The builder achieved points for pre-finished flooring that is third-party certified.  

    No Concrete Used: A unique aspect of this project is the complete avoidance of concrete. Instead, the builders relied on the existing wood float pad for the foundation. The house is floating on 2 HDPE floats on the east side along with a steel cage to keep the floats in place. This allows for divers to adjust the air pressure depending on water depth and wind causability.

    Smart Technology: Electronic shades and programmed lights were installed in the home, allowing for a more inclusive design. Utilizing smart features allows homeowners to live in their homes for longer without needing to change features of the home to accommodate lifestyle changes. 

    Nice Building Corp’s floating home on Lake Union is a testament to both ingenuity and the power of environmentally conscious building practices. Achieving Built Green 4-Star certification demonstrates a commitment to sustainable design, even when faced with the complexities of building on water. By combining thoughtful design, commitment to energy efficiency, indoor air-quality, and material selection, this project highlights how innovative homes can integrate into their natural surroundings while minimizing environmental impacts.

    Below is a breakdown of some of the significant credits this project was able to claim within the checklist:

    Site and Water

    • Re-use of existing floating home log raft to minimize volume of foundation material
    • Netting utilized to keep pollutants out of water during construction
    • Very strict BMPs in place for post-spill clean up procedures and use of non-toxic materials
    • Achieved 44% total water use reduction

    Energy Efficiency

    • All electric building utilizing centralized ductless mini-split heat pump
    • Induction cooktop
    • All major appliances are ENERGY STAR® labeled, including heat-pump dryer

    Health and Indoor Air Quality

    • Low-VOC paint and non-toxic products utilized in building
    • No carpet installed
    • Minimum 70% Recycled Content mineral wool insulation
    • Third-party certified pre-finished flooring

    Materials Efficiency

    • Reused floating foundation platform
    • Collection of locally/regionally sourced products utilized
    • Utilized multiple materials with DECLARE labels
    • Third-party FSC certified, sustainably harvested siding
    • Variety of products with recycled content installed in building
    • Longer lasting materials used on and in the building

    Equity and Social Justice

    • Smart technology utilized around the home for inclusive design
    • Implement priority elements of a project-specific ESJ plan
    • Community connectivity to transit and essential services
    • Use WMBE or MBE firms on the project
    • At least 50% of labor hours from workers who reside in economically distressed zip codes

    This home is not just another place to live – it’s an example of what future homebuilding can look like when innovation and environmentally-conscious are put at the forefront of design and construction. 

  • February Builders Bulletin

    by User Not Found | Feb 21, 2025

    Contact: data@mbaks.com

    February Builders Bulletin: Housing Inventory in King and Snohomish Counties Remains Low

    In February, builder confidence in the market for newly built single-family homes dropped to 42, a decline of five points from January, marking the lowest level in five months. In the West, the HMI stood at 35. According to NAHB, builder sentiment experienced a significant decline in February due to concerns over tariffs, elevated mortgage rates, and high housing costs.

    READ THE FULL REPORT

RESOURCES AND GUIDES

Help us build a sound future.